We will let you know as soon as your item becomes available. If you subscribed to receive our other emails, watch for upcoming deals, coupons and more.
A recent survey showed 85% of pro riders revealed that on average they rode boards that are 85% - 92% of their height. The formula to live by is: Rider Height (inches) x 2.54 x 0.88 = Suggested Board Length (cm). And presto, you have the perfect board for you in all conditions. Right? Wrong!! Keep in mind that there is no magical formula for every rider. It's more or less determined by terrain, conditions and most of all, personal preference. In general, an overall greater cm length will yield a board that can be controlled at and attain greater speeds. In addition, longer boards are better performers and float more in powder due to their increased surface area. Shorter overall lengths yield a board that is more maneuverable and offer a lower swing weight.
Your height (inches) x 2.54 x 0.88 = Suggested Board Length
Rider Height
Board Length
4'0"" (48"")
103 - 112cm
4'2"" (50"")
107 - 116cm
4'4"" (52"")
112 - 121cm
4'6"" (54"")
116 - 126cm
4'8"" (56"")
120 - 130cm
4'10"" (58"")
125 - 135cm
5'0"" (60"")
129 - 140cm
5'2"" (62"")
133 - 144cm
5'4"" (64"")
138 - 149cm
5'6"" (66"")
142 -154cm
5'8"" (68"")
146 -158cm
5'10"" (70"")
151- 163cm
6'0"" (72"")
155-168cm
6'2""+ (74"")
159cm - 172cm
Snowboard Width Sizing:
Board width is as important, if not more important, than overall length in selecting the right board for you. A board that is too narrow in relation to a rider's boot will cause toe and heel drag. With a board that's too wide, the rider will not be able to put adequate pressure on the toe and heel edge, thus creating an unresponsive ride. Use the following chart to gauge the relationship between your boot size and board.
Spread the word: click 'like' to share this with your friends.
Your message has been sent
Specifications
True Twin Freestyle
Traditional Camber
Flex Rating: 6
DS Select RFC Sustainable Core: lightweight and no irregularities for uniformly flexing core, constructed with poplar and beech woods, certified sustainable full wood core
Die Cut Sidewalls with 1.5mm Dampening System
Custom Weave – E Class Fiberglass Configuration
Wax Infused Rotation Sintered Speed Base: micro-textured base absorbs wax for more shred time
Die Cut + Silkscreen Base Graphics
PLT Topsheet Technology
360 Degree Steel Edges
4 x 2 Inserts
Aluminum Logo Base Inlay
Lengths: 148 cm, 152 cm, 156 cm, 159 cm
Effective Edge: 1150 mm (148), 1155 mm (152), 1190 mm (156), 1190 mm, 1215 mm (159)
Waist width: 24.80 cm (148), 25.20 cm (152), 25.50 cm (156), 25.8 cm (159)
Nose / Tail width: 29.10 cm (148), 29.50 cm (152), 29.90 cm (156), 30.20 cm (159)
Sidecut / Turning radius: 7.8 m (148), 7.90 m (152), 8.10 m (156), 8.30 m (159)