Available in two length combinations, the NRS J-Hook Straps are ideal for a multitude of tie-down applications. Ideally suited for strapping boats and other cargo to a trailer. If you've used our NRS Loop Straps before, the J-Hook strap works the same way, with the increased strength and versatility of a hefty rubber-coated metal hook instead of the webbing loops. Secure the hooks on either side of the load, and bring the two ends together over the cargo. Pass the running end through the standard NRS 1" buckle and pull tight. These J-Hook Straps are sold in pairs.
Specifications
1in. Wide Polypropylene Webbing
1,100 lbs Tensile Strength
Sold in Pairs
6' - 24in.L on the buckle side, 6'L tail section
14' - 40in.L on the buckle side, 14'L tail section"
We will let you know as soon as your item becomes available. If you subscribed to receive our other emails, watch for upcoming deals, coupons and more.
Compact and does the job
I'm using it to tie down my kayak on the car top carrier. The J-hooks attach easily and securely to the carrier tie-downs and the keepers fasten tightly.
July 27, 2010
*Center to Center is the distance from the center of one tube to the center of the other tube. **Length of frame is limited to the flat area on top of the tubes.
Your frame should be as wide or wider than your boat's center-to-center measurement. Determine this measurement by taking the width of your boat and subtracting the diameter of one main tube: C = W - D (where Center = raft Width minus tube Diameter). If the width of our frame doesn't match your numbers exactly, be sure to order a frame slightly wider than your center-to-center measurement.
