NRS Universal Canoe Blocks
Description
Use the NRS Universal Foam Canoe Blocks (set of 4) to protect your canoe and the top of your vehicle during transport. The slot in the foam blocks can pop onto the canoe gunwales (two per side). Then the flat non-skid surface is placed directly on the vehicle roof. You can also slip the slots in the blocks over factory rack load bars and set the gunwales on the non-skid surface. Please note: Tie-down straps are necessary to safely carry a boat on your car.
Specifications
- 4 - Non-skid foam blocks
- Molded channels for roof rack bars or canoe gunwales
- Sold in a set of 4 blocks
Also Available
Hover for zoom
Click for full size
No zoom available for this color
Loading...
http://www.altrec.com/write-review/review-submit.html
Sizing Chart
NRS Sizing Chart
NRS Livery Series| | Center to Center* | Flat Area** | Bighorn I | Bighorn II | Compact Outfitter | Stern | Longhorn | Skidguard | Fishing |
|---|
| Otter Livery 96 | 42.5" | 50" | N | N | N | N | 48" | N | N |
|---|
| Otter Livery 106 | 42.5" | 63" | N | N | N | N | 48" | N | N |
|---|
| Otter Livery 120 | 49" | 65" | 48" | N | N | Small | 48" | Y | 48" |
|---|
| Otter Livery 130 | 56" | 72" | 60" | N | N | Small | 60" | Small | 60" |
|---|
| Otter Livery 140 | 64" | 66" | 66" | N | 66" | Large | 66" | Large | 66" |
|---|
NRS Otter Series| | Center to Center* | Flat Area** | Bighorn I | Bighorn II | Compact Outfitter | Stern | Longhorn | Skidguard | Fishing |
|---|
| Otter 120 | 49" | 65" | 48" | N | N | Small | 48" | Y | 48" |
|---|
| Otter 130 | 56" | 72" | 60" | N | N | Small | 60" | Small | 60" |
|---|
| Otter 140 | 64" | 82" | 66" | N | 66" | Large | 66" | Large | 66" |
|---|
| Otter 142 | 58" | 82" | 60" | N | 60" | Small | 60" | Small | 60" |
|---|
| Otter 150 | 64" | 94" | 66" | 66" | 66" | Large | 66" | Large | 66" |
|---|
NRS Expedition Series| | Center to Center* | Flat Area** | Bighorn I | Bighorn II | Compact Outfitter | Stern | Longhorn | Skidguard | Fishing |
|---|
| E-120 | 49" | 65" | 48" | N | N | Small | 48" | Y | Y |
|---|
| E-130 | 56" | 72" | 60" | N | N | Small | 60" | Small | 60" |
|---|
| E-132D | 53.75" | 73" | 54" | N | N | Small | 54" | Small | 54" |
|---|
| E-136 | 57.5" | 73" | 60" | N | N | Small | 60" | Large | 60" |
|---|
| E-140 | 64" | 82" | 66" | N | 66" | Large | 66" | Large | 66" |
|---|
| E-142 | 58" | 82" | 60" | N | 60" | Small | 60" | Small | 60" |
|---|
| E-150 | 64" | 94 | 66" | 66" | 66" | Large | 66" | Large | 66" |
|---|
| E-160 | 69" | 88 | 72" | 72" | 72" | Large | 72" | N | 72" |
|---|
| E-161 | 96" | 96" | 66" | 66" | 66" | Large | 66" | Large | 66" |
|---|
| E-163D | 64" | 88" | 66" | 66" | 66" | Large | 66" | Large | 66" |
|---|
| E-180 | 76" | 100" | N | 82" | 82" | N | N | N | N |
|---|
Aire Series| | Center to Center* | Flat Area** | Bighorn I | Bighorn II | Compact Outfitter | Stern | Longhorn | Skidguard | Fishing |
|---|
| Puma | 47" | 60" | N | N | N | Small | 48" | N | 48" |
|---|
| Super Puma | 49.5" | 66" | 48" | N | N | Small | 48" | N | 48" |
|---|
| Super Duper Puma | 52" | 78" | 54" | N | N | Small | 54" | Small | 54" |
|---|
| 130 D, R | 57" | 72" | 60" | N | N | Small | 60" | Large | 60" |
|---|
| 143 D, E | 60" | 72" | 60" | N | N | Small | 60" | Large | 60" |
|---|
| 156 D, E | 63" | 74" | 66" | N | N | Large | 66" | Large | N |
|---|
Aire Tributary Series| | Center to Center* | Flat Area** | Bighorn I | Bighorn II | Compact Outfitter | Stern | Longhorn | Skidguard | Fishing |
|---|
| 9.5 SF | 48" | 45" | N | N | N | Small | N | N | N |
|---|
| 12.0 SF | 55" | 65" | 54" | N | N | Small | 54" | Small | 54" |
|---|
| 13.0 SB | 60" | 65" | 60" | N | N | Small | 60" | Small | 60" |
|---|
| 14.0 SB | 61" | 70" | 60" | N | 60" | Large | 60" | Large | 60" |
|---|
*Center to Center is the distance from the center of one tube to the center of the other tube.
**Length of frame is limited to the flat area on top of the tubes.
Your frame should be as wide or wider than your boat's center-to-center measurement. Determine this measurement by taking the width of your boat and subtracting the diameter of one main tube: C = W - D (where Center = raft Width minus tube Diameter). If the width of our frame doesn't match your numbers exactly, be sure to order a frame slightly wider than your center-to-center measurement.
close
