Our coming soon collection from Yakima was last updated on Sat, Mar 8, 2014.
Yakima EvenKeel Boat Rack (4 piece) 
The Yakima EvenKeel: has an all-new universal attachment system that fits round, square and most factory crossbars. Its innovative HullFlex design conforms to your boat for unbeatable hull protection.
Yakima HitchSki Rack 
If you already have a dual-arm hitch rack, just add the Yakima HitchSki, and you can carry enough skis and boards for the whole gang. Up to 6 pairs of skis or 4 snowboards or some combination of the two. You do the math.
Yakima 1A Raingutter Towers 
If your vehicle has rain gutters, the Yakima 1A Raingutter Towers are your ticket to a great rack. Easy and quick to install, these towers provide a solid platform for gear attachment.
Yakima 9ft. SKS Cable 
Deter would-be thieves from taking your toys with the Yakima 9ft. SKS Cable. This sturdy cable is 9 feet long with an adjustable slider to give you the perfect length to secure any gear to your Yakima Roof Rack. It is sold as the cable only, you must purchase the SKS Lock Core separately.
Yakima Accessory Lock Housing 
Add the Yakima Accessory Lock Housing and even non-locking rack mounts can enjoy full locking security and protection for your gear.
Yakima BigStack 
Speak softly and carry a BigStack. Yakima's BigStack has integrated padding and easier strap management, extreme stability, lockability with SKS lock cores and it folds down when not in use. Integrated padding protects your sweet boat from dents and dings. A closed ring and anchor head design works to easily catch straps; makes it simple to tie your boat down from any angle. When you aren't hauling your boats folding the BigStack down gives you a sleeker profile and saves the lives of uncountable bugs. Your boat is only as secure as your rack, the BigStack will lock to your rack with SKS lock cores (sold separately)
Yakima BoatLoader 
Going it alone? If you need help getting your boat on your car rack, the Boat Loader can lend an arm. Prop one end of your boat up on the extension and then lift the other end onto the rack. The Yakima Boat Loader retracts into the Yakima round cross bar when not in use. Extends 28" from end of crossbar to support even the largest canoes and kayaks. Helpful in getting heavy loads onto taller rooftops. Solid steel bar has an aluminum over-sleeve for corrosion resistance and boat finish protection. Retracts out of the way when not in use. Includes 3/16" hex wrench, for installation. Fits Yakima round bars exclusively.
Yakima BoatLocker (10in) 
The Yakima Boat Locker, with its 10 feet of coated stainless steel cable securely locks your boat to your roof rack. The two included attached cuffs secure your paddle as part of the bargain. Uses Yakima's standard SKS lock core(included).10' of flexible, coated stainless steel cable for dependability. Includes SKS lock core and key. Works with all roof rack types and all kinds of boats.
Yakima Bow/ Stern Tie Down 
A good rule of thumb: If your boat extends beyond the windshield, secure the bow and stern. For a safe and secure load, you can't beat Yakima's Bow/Stern Tie Downs.
Yakima BowDown 
The convenience of a stacker without having to remove it in the off season. Yakima's BowDown carries one boat on padded "J" cradles and then folds down to provide a clean silhouette. The BowDown carries one boat on its side, on top of the vehicle. When you're not using it, fold it down to keep a nice clean look to vehicle and reduce wind whistle. Padded hull guards prevent damage to your boat. Fits round, square, and most factory crossbars out of the box (fit list on carton). Locks to crossbar using SKS locking system (lock cores sold separately). The BowDown comes with heavy duty straps to secure your boat.
Yakima Control Tower Rack Mounts 
For cars with factory racks mounted on tracks. The Yakima Control Tower Rack Mounts are multi-sport towers that can fit almost any roof and carry any load.
Yakima CrossBar Pads (20in) 
Pad your crossbars with Yakima CrossBar Pads to keep your boat and other cargo from resting directly on the bars. These 20" wide pads are soft yet durable, with a nylon shell to protect the inner foam from abrasion andexposure.20" wide, protect a wide area of the bar. Nylon covers protect the foam and tie directly to round or square crossbars. Sold in pairs for protection under one boat.
Yakima DeadLock 
Lock your bike directly to your Yakima hitch rack and your rack to the car with the two-part DeadLock system.
Yakima End Cap (Set of Four) 
Replacement end caps for Yakima Crossbars. Keep out the elements as well as unfriendly flying insects. These Yakima End Caps push directly into the end of your Yakima Crossbars and are held in by friction. Comes as a set of 4 end caps.
Yakima Heavy Duty Straps 
Yakima HullRaiser 
The J-Cradle design of the Yakima Hull Raiser holds any kayak securely on its side. You'll have easier access to gear stored in your boat, and more room on your crossbars for bikes, cargo boxes, and other boats. Universal cradle design fits any kayak. Includes two padded Heavy Duty Straps to secure theboat. J-Cradles mount directly to round or square crossbars, or to factory racks using Yakima Mighty Mounts (sold separately). The base pads are made of Dynaflex™ and the upper pads of closed cell foam, for protection of your boats finish.
Yakima HullRaiser Aero 
The Hull Raiser kayak cradles hold any touring, whitewater or recreational kayak. They're compatible with round, square and most factory crossbars directly out of the box. You'll have easier access to gear stored in your boat, and more room on your crossbars for bikes, cargo boxes, and other boats. Universal cradle design fits any kayak. Includes two padded Heavy Duty Straps to secure the boat and a pair of Bow/Stern Tie Downs. J-Cradles mount directly to factory roof rack crossbars. The base pads are made of Dynaflex™ and the upper pads of closed cell foam, for protection of your boats finish.
Yakima HullyRoller (Pair) 
With a set of Yakima Hully Rollers on the back of your cars roof rack, you can easily position your kayak on your car top, even by yourself. When the boat is in place, strap it down securely right to the Hully Rollers. (You'll need either a second set of Hully Rollers, or other saddle mounts such as the Mako Saddles (sold separately) to support the front of the boat.)Pivoting rollers smoothly slide the kayak on and off the vehicle's top. The U-shaped rollers fit any boat shape. Rollers lock in place and do not roll when locked during transport. The rollers are padded with Dynaflex™, a soft, durable composite material, for sure grip on your boat and long wear. Attach easily to crossbars. For factory racks use Yakima Mighty Mounts (sold separately). Includes 16' Yakima padded Heavy Duty Strap and Bow/Stern Tie Downs.
Yakima LockUp 
The Yakima LockUp does it all. The cable lock secures bikes to a hitch rack and the hitch lock secures the rack to the car.
Yakima Mako Aero Saddles (Pair) 
Its hard to beat simple and easy. Yakima's Mako Aero is just that. Attach them to your rack, lay your boat on them and tie them down, quick, simple, easy. The Mako Aero's form fitting cradle fits any hull shape. Dynaflex™ pads flex to grip the boat hull securely. Includes bow/stern tie down straps for complete kayak stability. A soft polyester pad with a self adhesive back attaches to the saddle protecting the finish on your boat. Compatible with round, square and some factory crossbars out of the box, also works with Mighty Mounts (sold separately) to fit a wider range of factory racks. Sold in pairs. One pair supports 1/2 of your boat, front or back.
Yakima Mako Saddles 
The Yakima Mako Saddles cradle your kayak's hull with soft, grippy pads to keep it in place during transport. This half-set is the ideal companion to the HulleyRollers (sold separately), providing a firm support once your boat is loaded. Or combine two Mako Saddle half-sets for a reliable car top kayak carrier. Connects to car rack cross bars of any shape. A pair of Yakima Mako Saddles supports one end of your boat. Combine that with a set of Hully Rollers or get two sets of Makos to fully support your boat. Soft, grippy saddle Dynaflex™ pads flex and hold your kayak in place without scratching it. Saddle pads flex to fit any rigid hull shape. A soft polyester pad with a self adhesive back attaches to the saddle protecting the finish on your boat. Includes one 16' Yakima padded Heavy Duty Strap fortie-down and Bow/Stern Tie Downs.
Yakima MultiMounts 
Yakima's Multi Mounts can hold paddles, oars, masts, pipe, and just about anything else up to 5" in diameter. The mounts secure to both round and square crossbars, and keep their cargo firmly attached yet easily accessible. Slim design stays low to the crossbar, yet can handle up to three kayak paddles or two oars. Hypalon® straps keep your gear secure. Removable paddle pad won't scratch fiberglass, carbon or wood. Sold in pairs: one each for the front and backcross bars. Fit directly to round and square crossbars. Use Yakima Mighty Mounts (sold separately) for factory crossbars.
Yakima Outdoorsman 300 - Compact 
For heavy cargo hauling over your truck's bed, nothing beats the Yakima Outdoorsman 300. It's like a penthouse duplex for your gear. Clamps directly and securely to your truck bed, no drilling required. Combine one of the stand sets with towers on your trucks roof or use two sets of the stands on the bed itself. Each stand set can hold up to 300 pounds if on truckbed only. If used in conjunction with top-of-cab racks, check roof rack load limit. The Outdoorsman 300 is sold as a pair of stands - one for either side of truck bed. Use standard Yakima round crossbars (sold separately)with the Outdoorsman. Stands are designed for compact pickups. For full-size trucks, use Item # 3512, Outdoorsman 300 -Full-Size. Stand dimensions: 26" tall (from bed rail), base is 16"long.
For heavy cargo hauling over your truck's bed, nothing beats the Yakima Outdoorsman 300. It's like a penthouse duplex for your gear. Clamps directly and securely to your truck bed, no drilling required. Combine one set of the stands with towers on your trucks roof or use two sets of the stands on the bed itself. Each set of stands can hold up to 300 pounds if on truck bed only. If used in conjunction with top-of-cab racks, check roof rack load limit. The Outdoorsman 300 is sold as a pair of stands - one for either side of truck bed. Use standard Yakima round crossbars (sold separately)with the Outdoorsman. Stands are designed for full-size pickups. For compact trucks, use Item # 3511, Outdoorsman 300 -Compact. Stand dimensions: 29" tall (from bed rail), base is 16"long.
Yakima Q Stretch Kit 
The Yakima Q Stretch Kit allows you to widen the distance between the crossbars on smaller cars giving you a more stable platform on which to load your gear.
Yakima Q Tower Crossbar Mounts 
Have Bikes, Kayaks, and Skis; Will Travel. What you need is Yakima's Q Towers; an innovative way of securing all your toys to your vehicle. Q Towers, combined with the appropriate Q Clip will fit most vehicles, are easy to put on and are super secure.
Yakima Rattler Wheelstrap 
The Rattler Wheelstrap is a replacement ratcheting strap that fits Yakima wheel trays.
Yakima Ripcord Surf/Cargo Straps 
Yakima Side Loader (pair) 
Keep it simple. Yakima Side Loaders bolt to the side of your camper shell making a perfect spot for 1A Raingutter towers. The slim profile fits easily between the top of the camper and the windows.
Yakima Sup Brah Surf/Cargo Tie Downs 
Yakima Universal MightyMounts 
There's a reason that Yakima calls them "Universal" MightyMounts. These little marvels let you fit just about any Yakima accessory to your factory roof rack bars. A set of them is mighty nice to have. Soft, grippy Dynaflex™ pads protect your crossbars and hold the Mighty Mounts firmly in place. Universal design lets you move your racks and accessories from vehicle to vehicle with no hassle. Sold in a set of four, no tools required for assembly. The Accessory Lock Housings and SKS Lock Cores add additional security (sold separately).
Yakima Wavehog Surf/Cargo Set 
Yakima Wheel Fork Mount 
Save space inside your car by using the Yakima Wheel Fork Mount. If anyone asks you why it's on your roof, just say your car flips over and turns into a unicycle.
Yakima Wide Body (pair) 
Fits right on your camper shell, keeping bars low and towers away from the shell sides. Bolt securely to the side of almost any truck camper shell. Provide firm attachment points for Yakima 1A Raingutter towers. Kit includes two Side Loaders, plus all necessary bolts, nuts and locking washers. (Installation requires drilling.)1A Raingutter Towers not included.
Yakima WindJammer 
Minimize the noise of wind vibration with the Yakima WindJammer. Clamps around your front crossbar and really helps dampen the noise.
Yakima BlockHead Bike Mount 
Mount your bike on a pickup truck, RV or boat with the Yakima BlockHead Bike Mount. You can also attach one to the garage wall for a handy storage support.
Yakima Boa Bike Rack 
The Yakima Boa Bike Rack is a slick, affordable fork mount system for latching your bicycle to either round or square crossbars.
Yakima ForkLift Bike Rack 
Feast your eyes on Yakima's ForkLift Bike Rack, with direct to factory crossbar capability right out of the box. It features easy tool-free installation and its compatible with most disc brakes. Quick and easy, tool-free installation makes life a breeze. Sleek design and automotive finish looks extremely spiffy on your vehicle. Secure and lockable skewer with integrated adjustment knob for single-handed, easy access (SKS lock cores sold separately). Easy-to-adjust sliding wheel tray makes positioning the rear wheel a snap. Fits round, square and most factory crossbars out of the box.
Yakima FrontLoader Bike Rack 
With the FrontLoader Bike Rack universal fitting multiple types of crossbars, it's Yakima' s most versatile bike rack ever. Bikes stay vertical as they roll onto the rack for quick and easy loading.
Yakima KingJoe Bike Mount 
The thick padded feet of the Yakima KingJoe Bike Trunk Mount protect your car's paint job. Transport either 2 or 3 bikes in style. Get out there!
Yakima QuickBack Bike Rack 
The Yakima QuickBack Bike Mount is the worlds fastest-installing, easiest-to-use trunk mount. So youll be loaded up and off to the races (or campground) in no time flat. The integrated adjustment knob lets you effortlessly adjust arm angles to gently cradle your bikes. With the labeled strap system and striking design, the QuickBack completely redefines what a rear mount rack is supposed to be. The narrow arm design fits a wide variety of bikes. The QuickBack 2 will accommodate up to 2 bikes while up to 3 bikes will fit on the QuickBack 3. Arms quickly fold down when not in use. Premium Tri-Padded feet and coated padded metal buckles protect your vehicles paint job. SwitchBlade™ anti-sway cradles eliminate bike-to-bike contact. Compatible with most factory spoilers, see fit list for specifics. Includes glass hatch hooks for glass trunk or gate mounts. A passive security system with a steel-reinforced strap goes into your trunk or hatch to keep your rack attached to your vehicle. Integrated bottle opener. Oh Yeah.
If you have a spare tire on the rear of your vehicle, the Yakima SpareTime Spare Tire Bike Rack is for you. Attaches to the mounting bolts for a secure fit and peace of mind while traveling down the road.
Yakima Tube Top Bike Rack 
If your top tube is funkier than a disco bassline, dont fret. The TubeTop makes your bike compatible with any hitch mount. Installs quickly and securely on a wide range of bikes. Keeps your bike mounted solidly on single and dual mast mounts Larger diameter tubing and anti-rotation inserts for greater stability. Larger molded collars are gentle with your bike stem and seat post.
Yakima Viper Bike Rack 
With the one-hand skewer adjustment, it's never been easier to get your bike on your roof. The Yakima Viper Bike Rack delivers convenience and value in one sharp looking rack.
Please enter a word or two: